New Design

Looking for some thoughts and opinions. Have some shake heads available just like the ones I already sell but with a little bit of an improvement. Like a lot of things, not sure the cost is worth it and is why I am posting. Cost is about 25% to 30% more.

The new ones have a little peice of wire coming down the middle of the spring that extends out past the spring just a little bit. Will make rigging a little bit easier. Can now just line up whatever peice of plastic you are using on the little peice of wire. The little peice of wire will act as a quide. Can then just push plastic up to spring an twist on. Has always been a problem for me with some of the smaller plastics and even more so when my hands get cold. But like I said above, not sure the cost difference is worth it.

Here are a couple pictures of some samples that were sent to me a couple weeks ago. Before anybody ask, yes I can get the same shake heads with a TRUE EWG HOOKS !!! Not sure what sizes but believe all the way to 3/4 oz.

 

This post is hidden to guests.
To view this post, please log in.
If you are not a member, you will need to sign up.

 

This post is hidden to guests.
To view this post, please log in.
If you are not a member, you will need to sign up.

 

This post is hidden to guests.
To view this post, please log in.
If you are not a member, you will need to sign up.

 

This post is hidden to guests.
To view this post, please log in.
If you are not a member, you will need to sign up.

 

This post is hidden to guests.
To view this post, please log in.
If you are not a member, you will need to sign up.

 

This post is hidden to guests.
To view this post, please log in.
If you are not a member, you will need to sign up.