Short arm Spinnerbaits

It's nice to buy custom made short arm spinnerbaits from our site's builders. They do a great job and the spinners sure are pretty. Sometimes however, you need one NOW, and all you have are normal long arm spinners. Well. you can remove the wheel and hardware and using a cutter, cut the arm down. Replace the wheel and hardware and crimp the end of the wire. The whole process takes about 5 minutes and you're ready to fiish. A reminder, short arm spinners are made to helicopter straight down so use a cupped blade like a Colorado, Indiana, or turtle back.

 

This post is hidden to guests.
To view this post, please log in.
If you are not a member, you will need to sign up.

 

This post is hidden to guests.
To view this post, please log in.
If you are not a member, you will need to sign up.

 

This post is hidden to guests.
To view this post, please log in.
If you are not a member, you will need to sign up.